ioLogik E2200 Series
Smart Ethernet remote I/O with Click&Go Logic
Features and Benefits
- Front-end intelligence with Click&Go control logic, up to 24 rules
- Active communication with MX-AOPC UA Server
- Saves time and wiring costs with peer-to-peer communications
- Supports SNMP v1/v2c/v3
- Friendly configuration via web browser
- Simplifies I/O management with MXIO library for Windows or Linux
- Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments
Certifications
- UL Listed
- CE
- FCC
Introduction
Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
Models in this series (14)
| — | ioLogik E2210 | ioLogik E2210-T | ioLogik E2212 | ioLogik E2212-T |
| Input/Output Interface | 12 x DI, 8 x DO | 12 x DI, 8 x DO | 8 x DI, 4 x DIO, 8 x DO | 8 x DI, 4 x DIO, 8 x DO |
| Digital Input Sensor Type | Wet Contact (NPN), Dry Contact | Wet Contact (NPN), Dry Contact | Wet Contact (NPN or PNP), Dry Contact | Wet Contact (NPN or PNP), Dry Contact |
| Analog Input Range | – | – | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | ioLogik E2214 | ioLogik E2214-T | ioLogik E2240 | ioLogik E2240-T |
| Input/Output Interface | 6 x DI, 6 x Relay | 6 x DI, 6 x Relay | 8 x AI, 2 x AO | 8 x AI, 2 x AO |
| Digital Input Sensor Type | Wet Contact (NPN or PNP), Dry Contact | Wet Contact (NPN or PNP), Dry Contact | – | – |
| Analog Input Range | – | – | ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA | ±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | ioLogik E2242 | ioLogik E2242-T | ioLogik E2260 | ioLogik E2260-T |
| Input/Output Interface | 12 x DIO, 4 x AI | 12 x DIO, 4 x AI | 4 x DO, 6 x RTD | 4 x DO, 6 x RTD |
| Digital Input Sensor Type | Wet Contact (NPN or PNP), Dry Contact | Wet Contact (NPN or PNP), Dry Contact | – | – |
| Analog Input Range | ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA | ±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | ioLogik E2262 | ioLogik E2262-T | — | — |
| Input/Output Interface | 4 x DO, 8 x TC | 4 x DO, 8 x TC | ||
| Digital Input Sensor Type | – | – | ||
| Analog Input Range | – | – | ||
| Operating Temp. | -10 to 60°C | -40 to 75°C | ||
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for ioLogik E2210. Per-model differences are listed in the selection grid above.
Control Logic
- Language
- Click&Go
Input/Output Interface
- Digital Input Channels
- 12
- Digital Output Channels
- 8
- Buttons
- Reset button
- Rotary Switch
- 0 to 9
- Isolation
- 3k VDC or 2k Vrms
Digital Inputs
- Connector
- Screw-fastened Euroblock terminal
- Sensor Type
- Dry contact Wet contact (NPN)
- I/O Mode
- DI or event counter
- Dry Contact
- On: short to GND Off: open
- Wet Contact (DI to GND)
- On: 0 to 3 VDC Off: 10 to 30 VDC
- Counter Frequency
- 900 Hz
- Digital Filtering Time Interval
- Software configurable
- Points per COM
- 12 channels
Digital Outputs
- Connector
- Screw-fastened Euroblock terminal
- I/O Type
- Sink
- I/O Mode
- DO or pulse output
- Current Rating
- 200 mA per channel
- Pulse Output Frequency
- 1 kHz
- Over-Current Protection
- 0.65 A per channel @ 25°C
- Over-Temperature Shutdown
- 175°C (min.)
- Over-Voltage Protection
- 45 VDC (typical)
LED Interface
- LED Indicators
- PWR, RDY, Serial, I/O Status
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 1
- Magnetic Isolation Protection
- 1.5 kV (built-in)
Ethernet Software Features
- Configuration Options
- Windows Utility (ioAdmin), Web Console (HTTP)
- Industrial Protocols
- Modbus TCP Server (Slave), SNMPv1/v2c/v3, SNMPv1 Trap, Moxa AOPC (Active Tag), MXIO Library, CGI commands
- Management
- BOOTP, IPv4, SMTP, DHCP Client, HTTP, TCP/IP
- MIB
- Device Settings MIB
- Time Management
- SNTP
Security Functions
- Authentication
- Local database
- Encryption
- HMAC
- Security Protocols
- SNMPv3
Modbus TCP
- Functions Supported
- 1, 2, 3, 4, 5, 6, 15, 16
- Mode
- Server (Slave)
Serial Interface
- Connector
- Terminal block
- Serial Standards
- RS-485
- No. of Ports
- 1
- Baudrate
- 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
- Parity
- None
- Data Bits
- 8
- Stop Bits
- 1
- Flow Control
- None
Serial Signals
- RS-485-2w
- Data+, Data-, GND
Serial Software Features
- Industrial Protocols
- Modbus RTU Master
Platform
- Real-time Clock (RTC)
- Real-time clock with battery backup
Power Parameters
- Power Connector
- Screw-fastened Euroblock terminal
- No. of Power Inputs
- 1
- Input Voltage
- 12 to 36 VDC
- Power Consumption
- 203 mA @ 24 VDC
Physical Characteristics
- Dimensions
- 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
- Weight
- 250 g (0.55 lb)
- Installation
- DIN-rail mounting, Wall mounting
- Wiring
- I/O cable, 16 to 26 AWG Power cable, 16 to 26 AWG
- Housing
- Plastic
Environmental Limits
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
- Altitude
- 2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
- Safety
- UL 508
- EMC
- EN 61000-6-2/-6-4
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Shock
- IEC 60068-2-27
- Vibration
- IEC 60068-2-6
- Freefall
- IEC 60068-2-32
Declaration
- Green Product
- RoHS, CRoHS, WEEE
MTBF
- Time
- 213,673 hrs
- Standards
- Telcordia SR332
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Software Package for MXview One Series (Linux version)552.6 MB | Software Package | v1.7.2 | May 08, 2026 May 08, 2026 Release notes |
| Software Package for MXview One Series (Windows version)249.1 MB | Software Package | v1.7.2 | May 08, 2026 May 08, 2026 Release notes |
| MX-AOPC UA Server112.6 MB | Utility | v2.2 | Nov 28, 2022 Nov 28, 2022 Release notes |
| MX-AOPC UA Logger91.7 MB | Utility | v2.2 | Nov 28, 2022 Nov 28, 2022 Release notes |
| ioAdmin Configuration Utility7.7 MB | Utility | v3.20 | Jul 12, 2022 Jul 12, 2022 Release notes |
| Software Package for ioLogik E2200 Series25.9 MB | Software Package | v1.0 | Jan 15, 2018 Jan 15, 2018 Release notes |
| MX-AOPC UA Server36.3 MB | Utility | v1.6 | Jun 14, 2017 Jun 14, 2017 Release notes |
| MX-AOPC UA Logger44.2 MB | Utility | v1.1 | Jun 14, 2017 Jun 14, 2017 Release notes |
| Firmware for ioLogik E2200 Series (E2210)2.4 MB | Firmware | v3.13 | Jan 20, 2017 Jan 20, 2017 Release notes |
| Firmware for ioLogik E2200 Series (E2262)1.2 MB | Firmware | v3.12 | Jan 19, 2017 Jan 19, 2017 Release notes |
| Firmware for ioLogik E2200 Series (E2212)1.2 MB | Firmware | v3.14 | Jan 19, 2017 Jan 19, 2017 Release notes |
| Firmware for ioLogik E2200 Series (E2240)2.4 MB | Firmware | v3.12 | Jan 19, 2017 Jan 19, 2017 Release notes |
| Firmware for ioLogik E2200 Series (E2214)1.2 MB | Firmware | v3.12 | Jan 19, 2017 Jan 19, 2017 Release notes |
| Firmware for ioLogik E2200 Series (E2260)1.2 MB | Firmware | v3.13 | Jan 19, 2017 Jan 19, 2017 Release notes |
| Firmware for ioLogik E2200 Series (E2242)1.3 MB | Firmware | v3.12 | Jan 19, 2017 Jan 19, 2017 Release notes |
| MXIO Library for Linux Kernel 3.x2.1 MB | Library | v2.12 | Dec 27, 2016 Dec 27, 2016 Release notes |
| MXIO Library for Linux Kernel 4.x2.1 MB | Library | v2.12 | Dec 27, 2016 Dec 27, 2016 Release notes |
| MXIO .NET Library for Windows2.7 MB | Library | v1.10 | Dec 27, 2016 Dec 27, 2016 Release notes |
| MXIO Library for Windows2.5 MB | Library | v2.12 | Dec 25, 2016 Dec 25, 2016 Release notes |
| MIB file for ioLogik E224010.2 KB | Software Package | v3.8 | Feb 29, 2016 Feb 29, 2016 Release notes |
| MIB file for ioLogik E221416.9 KB | Software Package | v3.8 | Feb 29, 2016 Feb 29, 2016 Release notes |
| MIB file for ioLogik E226011.0 KB | Software Package | v3.8 | Feb 29, 2016 Feb 29, 2016 Release notes |
| MIB file for ioLogik E221015.7 KB | Software Package | v3.8 | Feb 29, 2016 Feb 29, 2016 Release notes |
| MIB file for ioLogik E224213.8 KB | Software Package | v3.8 | Feb 29, 2016 Feb 29, 2016 Release notes |
| MIB file for ioLogik E221218.5 KB | Software Package | v3.8 | Feb 29, 2016 Feb 29, 2016 Release notes |
| MIB file for ioLogik E226211.3 KB | Software Package | v3.8 | Feb 29, 2016 Feb 29, 2016 Release notes |
| MXIO Library for Linux Kernel 2.6.x1.8 MB | Library | v2.11 | Feb 13, 2014 Feb 13, 2014 Release notes |
| ioEventLog Utility3.4 MB | Utility | v1.4 | Sep 21, 2008 Sep 21, 2008 Release notes |
| Tech Note: The Security Hardening Guide for the ioLogik E2200 Series)323.5 KB | Tech Note | v1.0 | Nov 07, 2025 |
| FOSS Statement for ioLogik E2200 Series144.0 KB | Declaration | v1.0 | Dec 20, 2024 |
| Declaration of Conformity for ioLogik E2240 Series258.4 KB | Declaration | v1.0 | Mar 18, 2024 |
| Declaration of Conformity for ioLogik E2242 Series303.0 KB | Declaration | v1.0 | Mar 18, 2024 |
| Declaration of Conformity for ioLogik E2260 Series300.5 KB | Declaration | v1.0 | Mar 18, 2024 |
| Declaration of Conformity for ioLogik E2212 Series302.5 KB | Declaration | v1.0 | Mar 18, 2024 |
| Declaration of Conformity for ioLogik E2262 Series1.4 MB | Declaration | v1.0 | Mar 18, 2024 |
| Declaration of Conformity for ioLogik E2214 Series303.2 KB | Declaration | v1.0 | Mar 18, 2024 |
| Declaration of Conformity for ioLogik E2210 Series303.2 KB | Declaration | v1.0 | Mar 13, 2024 |
| Manual for ioLogik E2200 Series11.9 MB | Manual | v7.2 | Aug 08, 2022 |
| Datasheet for ioLogik E2200 Series1.4 MB | Datasheet | v1.3 | May 19, 2022 |
| QIG for ioLogik E2200 Series281.2 KB | QIG | v1.1 | May 05, 2021 |
| Manual for Click and Go V24.3 MB | Manual | 3.2 | Sep 11, 2020 |
| Introduction to RTU Controllers1.5 MB | Manual | v1.0 | Feb 24, 2012 |
| 2D CAD for ioLogik E2000968.0 KB | 2D CAD | — | Nov 13, 2007 |
Need pricing on the ioLogik E2200 Series?
Tell us quantities and we'll come back with a quote.