ioMirror E3200 Series
Ethernet peer-to-peer I/O with 8 digital inputs and 8 digital outputs
Features and Benefits
- Direct input-to-output signal communication over IP
- High-speed peer-to-peer I/O within 20 ms
- One physical alarm port for connectivity status
- Utility for quick and easy web-based settings
- Local alarm channel
- Remote alarm message
- Supports Modbus TCP for remote monitoring
Certifications
- UL Listed
- CE
- FCC
Introduction
The ioMirror E3200 Series, which is designed as a cable-replacement solution to connect remote digital input signals to output signals over an IP network, provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3200 Series device, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With the ioMirror, remote sensors can be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures, and signals can be transmitted over virtually unlimited distances, without noise problems.
Models in this series (1)
| — | ioMirror E3210 | — | — | — |
| Input/Output Interface | 8 x DI, 8 x DO | |||
| Operating Temp. | -10 to 60°C | |||
| — | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Input/Output Interface
- Digital Input Channels
- 8
- Digital Output Channels
- 8
- Alarm Contact Channels
- 1
- Isolation
- 3k VDC or 2k Vrms
- Buttons
- Reset button
Digital Inputs
- Connector
- Screw-fastened Euroblock terminal
- Digital Filtering Time Interval
- Software configurable
- Dry Contact
- On: short to GND Off: open
- I/O Mode
- DI
- Over-Voltage Protection
- 36 VDC
- Points per COM
- 8 channels
- Sensor Type
- Dry contact Wet Contact (NPN)
- Wet Contact (DI to GND)
- On: 10 to 30 VDC Off: 0 to 3 VDC
Digital Outputs
- Connector
- Screw-fastened Euroblock terminal
- Current Rating
- 200 mA per channel
- I/O Mode
- DO
- I/O Type
- Sink
- Over-Current Protection
- 0.6 A per channel @ 25°C
- Over-Temperature Shutdown
- 160°C (min.)
- Over-Voltage Protection
- 35 VDC
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 1
- Magnetic Isolation Protection
- 1.5 kV (built-in)
Ethernet Software Features
- Configuration Options
- Web Console (HTTP) Windows Utility (ioMirrorAdmin)
- Industrial Protocols
- Modbus TCP Server (Slave)
- Management
- BOOTP DHCP Client HTTP TCP/IP UDP
- Time Management
- SNTP
Modbus TCP
- Functions Supported
- 1, 2, 3, 4, 5, 6, 15, 16
LED Interface
- LED Indicators
- PWR, Ready
Power Parameters
- Power Connector
- Screw-fastened Euroblock terminal
- No. of Power Inputs
- 1
- Input Voltage
- 12 to 48 VDC
- Power Consumption
- 136 mA @ 24 VDC
Alarm Contacts
- I/O Type
- Sink
- Current Rating
- Max. 200 mA per channel
- Connector
- Screw-fastened Euroblock terminal
Physical Characteristics
- Housing
- Plastic
- Dimensions
- 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
- Weight
- 205 g (0.45 lb)
- Wiring
- I/O cable, 16 to 26 AWG Power cable, 16 to 26 AWG
- Installation
- Wall mounting DIN-rail mounting
Environmental Limits
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
- Altitude
- 2000 m Note: Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
- Freefall
- IEC 60068-2-32
- EMI
- EN 61000-6-4, FCC Part 15B Class A
- Safety
- UL 508
- Shock
- IEC 60068-2-27
- Vibration
- IEC 60068-2-6
- EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
MTBF
- Time
- 231,020 hrs
- Standards
- Telcordia SR332
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Firmware for ioMirror E3200 Series (E3210)905.8 KB | Firmware | v1.4 | Sep 18, 2020 Sep 18, 2020 Release notes |
| Firmware for ioMirror E3200 Series838.6 KB | Firmware | v1.0 | Feb 11, 2018 Feb 11, 2018 Release notes |
| MX-AOPC UA Logger44.2 MB | Utility | v1.1 | Jun 14, 2017 Jun 14, 2017 Release notes |
| MX-AOPC UA Server36.3 MB | Utility | v1.6 | Jun 14, 2017 Jun 14, 2017 Release notes |
| Software Package for ioMirror E3200 Series8.4 MB | Software Package | v1.0 | Jan 10, 2017 Jan 10, 2017 Release notes |
| ioMirrorAdmin Configuration Utility4.1 MB | Utility | v1.3 | Jun 02, 2016 Jun 02, 2016 Release notes |
| ioEventLog Utility3.4 MB | Utility | v1.4 | Dec 15, 2008 Dec 15, 2008 Release notes |
| Datasheet for ioMirror E3200 Series598.4 KB | Datasheet | v2.0 | Feb 02, 2026 |
| FOSS Statement for ioMirror E3200 Series143.5 KB | Declaration | v1.0 | Dec 20, 2024 |
| Declaration of Conformity (EU/UK) for ioMirror E3210 Series300.7 KB | Declaration | v1.0 | Jan 08, 2024 |
| QIG for ioMirror E3200 Series227.1 KB | QIG | v1.1 | May 05, 2021 |
| Manual for ioMirror E3200 Series4.4 MB | Manual | v1.0 | Jun 26, 2017 |
| 2D CAD for ioLogik E3210715.8 KB | 2D CAD | — | May 09, 2007 |
Need pricing on the ioMirror E3200 Series?
Tell us quantities and we'll come back with a quote.