VPort P06HC-1V28M-CT
VPort P06HC-1V SeriesEN 50155, HD, cubic IP cameras
- 1/2.7” progressive scan camera with maximum 1280 x 800 resolution at up to 30 fps
- High quality video imaging with DNR and WDR
- Up to 3 H.264 or MJPEG independent video streams
- DynaStream™ for optimized network efficiency
- CBR Pro™ for high image quality in limited bandwidth transmissions
- Supports DHCP options 66 and 67 for auto-configuration
- ONVIF support for standardization and interoperability
Certifications En50155 · UL Listed · CE · FCC
Ships from and sold by A5 IT, an authorized Moxa reseller.
Specifications
Ethernet Interface
- PoE Ports (10/100BaseT(X), M12 D-coded 4-pin female connector)
- 1
Ethernet Software Features
- Protocols
- TCP/IP, IPv4, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, SMTP, NTP Client, DNS, DDNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, DHCP Opt66/67, HTTPS
Security Functions
- Password
- User-level password protection
- Filter
- IP address
- Encryption
- HTTPS
Power Parameters
- No. of Power Inputs
- 1
- Source of Input Power
- PoE (IEEE 802.3af)
- Input Current
- 0.17 A @ 48 VDC
Camera Characteristics
- Sensor
- 1/2.7-in HD progressive scan CMOS
- Lens
- f=2.8 mm, F2.0, Diagonal 126°, Horizontal 113°, Vertical 58°
- Minimum Illumination
- Color: 0.2 lux, at F1.2 (Gain High, 50 IRE, 1/30 sec)
- Synchronization
- Internal
- White Balance
- ATW/AWB
- Electronic Shutter
- Auto (1/30 to 1/25000 sec)
- S/N Ratio
- Maximum 50 dB (AGC off; DNR on)
- DNR (digital noise reduction)
- Built-in DNR
- WDR (wide dynamic range)
- 110 dB
- Flickerless Control
- Automatic, 50 Hz, 60 Hz modes
- Image Rotation
- Flip, Mirror, and 180° rotation
- Image Setting
- Manual tuning with saturation, sharpness, and contrast
- AGC (auto gain control)
- 2X, 4X, 8X, 16X, 32X, 64X
- BLC (back light compensation)
- High/Medium/Low
Video Interface
- Video Compression
- H.264 (ISO/IEC 14496-10) or MJPEG
- Video Output
- via Ethernet
- Video Streams
- 3 independent H.264 or MJPEG video streams
- Video Resolution and FPS (frames per second)
- Read more NTSC PAL Size Max. FPS Size Max. FPS QCIF 176 x 112 30 176 x 144 25 QVGA 320 x 240 30 320 x 240 25 CIF 352 x 240 30 352 x 288 25 VGA 640 x 480 30 640 x 480 25 4CIF 704 x 480 30 704 x 576 25 Full D1 720 x 480 30 720 x 576 25 SVGA 800 x 600 30 800 x 600 25 HD 1280 x 720 30 1280 x 720 25 WXGA 1280 x 800 30 1280 x 800 25 Note: Multiple streams may not support up to 30 FPS.
- Video Viewing
- DynaStream™ support for changing the video frame rate automatically CBR Pro™ for good image quality in limited bandwidth transmissions 3 privacy mask areas provided Adjustable image size and quality Timestamp and text overlay OSD (On Screen Display) position adjustable Maximum of 5 simultaneous unicast connections, 50 multicast clients
Camera Software Development
- Video Standards
- ONVIF Profile S
Camera Alarm Software Features
- Intelligent Video
- Camera tampering detection
- Video Motion Detection
- 3 independently configurable areas
- Scheduling
- Daily repeat timing schedule
- Imaging
- JPEG snapshots for pre/trigger/post alarm images
- Custom Alarms
- HTTP event servers for setting customized alarm actions
- FTP Messaging
- Automatic transfer of stored images via FTP as event-triggered actions
Software Requirements
- Memory Size
- 1 GB
- Operating System
- Windows 7 or above
- Browser
- Internet Explorer 9.x or above
- Multimedia
- DirectX 9.0C or above
Physical Characteristics
- Housing
- Metal
- Dimensions
- 60 x 60 x 74.6 mm (2.36 x 2.36 x 2.94 in)
- Weight
- 300 g (0.66 lb)
- Installation
- Flush mounting
- Protection
- PCB conformal coating
Environmental Limits
- Operating Temperature
- -40 to 55°C (-40 to 131°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
- Ingress Protection
- IEC 60529, IP30 (provided screws are used to fill the camera housing screw holes)
- Altitude
- 2000 m
Standards and Certifications
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Signal: 2 kV IEC 61000-4-5 Surge: Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Freefall
- IEC 60068-2-31
- Railway Fire Protection
- EN 45545-2
- Safety
- UL 62368-1
- Shock
- IEC 60068-2-27, IEC 61373, EN 50155
- Vibration
- IEC 60068-2-64, IEC 61373, EN 50155
- Railway
- EN 50155 (complies with a portion of EN 50155 specifications)
MTBF
- Time
- 692,847 hrs
- Standards
- IEC 62380
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Documentation
| Name | Type | Version | Date |
|---|---|---|---|
| Software Package for VPort P06HC-1V Series (MIB file)34.8 KB | Software Package | v2.0 | Oct 25, 2021 Oct 25, 2021 Release notes |
| Firmware for VPort P06HC-1V Series19.6 MB | Firmware | v2.0 | Oct 25, 2021 Oct 25, 2021 Release notes |
| FOSS Statement of VPort P06HC-1V Series419.3 KB | Declaration | v1.0 | Nov 21, 2025 |
| Declaration of Conformity for VPort P06HC-1V Series310.7 KB | Declaration | v1.0 | Oct 30, 2023 |
| Datasheet for VPort P06HC-1V Series730.5 KB | Datasheet | v1.0 | Oct 25, 2021 |
| QIG for VPort P06HC-1V Series1.4 MB | QIG | v1.0 | Oct 25, 2021 |
| Manual for VPort P06HC-1V Series4.2 MB | Manual | v1.0 | Oct 25, 2021 |