MGate 5114 Series
1-port Modbus RTU/ASCII/TCP/IEC 101-to-IEC 104 gateways
Features and Benefits
- Protocol conversion between Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104
- Supports IEC 60870-5-101 master/slave (balanced/unbalanced)
- Supports IEC 60870-5-104 client/server
- Supports Modbus RTU/ASCII/TCP master/client and slave/server
- Effortless configuration via web-based wizard
- Status monitoring and fault protection for easy maintenance
- Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis
- microSD card for configuration backup/duplication and event logs
- Built-in Ethernet cascading for easy wiring
- Redundant dual DC power inputs and relay output
- -40 to 75°C wide operating temperature models available
- Serial port with 2 kV isolation protection
Certifications
- UL Listed
- CE
- FCC
Introduction
The MGate 5114 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port for Modbus RTU/ASCII/TCP, IEC 60870-5-101, and IEC 60870-5-104 network communications. By integrating commonly used power protocols, the MGate 5114 provides the flexibility needed to fulfill the various conditions that arise with field devices that use different communications protocols to connect to a power SCADA system. To integrate Modbus or IEC 60870-5-101 devices onto an IEC 60870-5-104 network, use the MGate 5114 as a Modbus master/client or IEC 60870-5-101 master to collect data and exchange data with IEC 60870-5-104 systems.
Models in this series (2)
| — | MGate 5114 | MGate 5114-T | — | — |
| Operating Temp. | 0 to 60°C | -40 to 75°C | ||
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for MGate 5114. Per-model differences are listed in the selection grid above.
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 2 Auto MDI/MDI-X connection
- Magnetic Isolation Protection
- 1.5 kV (built-in)
Ethernet Software Features
- Industrial Protocols
- Modbus TCP Client (Master) Modbus TCP Server (Slave) IEC 60870-5-104 Client IEC 60870-5-104 Server
- Configuration Options
- Web Console (HTTP/HTTPS) Device Search Utility (DSU) Telnet Console
- Management
- ARP DHCP Client DNS HTTP HTTPS SMTP SNMP Trap SNMPv1/v2c/v3 TCP/IP Telnet SSH UDP NTP Client
- MIB
- RFC1213, RFC1317
- Time Management
- NTP Client
Security Functions
- Authentication
- Local database
- Encryption
- HTTPS AES-128 AES-256 SHA-256
- Security Protocols
- SNMPv3 SNMPv2c Trap HTTPS (TLS 1.3)
Serial Interface
- Console Port
- RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
- No. of Ports
- 1
- Connector
- DB9 male
- Serial Standards
- RS-232/422/485
- Baudrate
- 50 bps to 921.6 kbps
- Data Bits
- 7, 8
- Parity
- Even Mark None Odd Space
- Stop Bits
- 1, 2
- Flow Control
- RTS Toggle (RS-232 only) RTS/CTS
- RS-485 Data Direction Control
- Automatic Data Direction Control (ADDC)
- Pull High/Low Resistor for RS-485
- 1 kilo-ohm, 150 kilo-ohms
- Terminator for RS-485
- 120 ohms
- Isolation
- 2 kV (built-in)
Serial Signals
- RS-232
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422
- Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w
- Data+, Data-, GND
- RS-485-4w
- Tx+, Tx-, Rx+, Rx-, GND
Serial Software Features
- Industrial Protocols
- Modbus RTU/ASCII Master Modbus RTU/ASCII Slave IEC 60870-5-101 Master (Balanced/Unbalanced) IEC 60870-5-101 Slave (Balanced/Unbalanced)
- Configuration Options
- Serial Console
Modbus RTU/ASCII
- Mode
- Master, Slave
- Functions Supported
- 1, 2, 3, 4, 5, 6, 15, 16, 23
- Max. No. of Commands
- 128
Modbus TCP
- Mode
- Client (Master), Server (Slave)
- Functions Supported
- 1, 2, 3, 4, 5, 6, 15, 16, 23
- Max. No. of Client Connections
- 16
- Max. No. of Server Connections
- 32
- Max. No. of Commands
- 128
IEC 60870-5-104
- Mode
- Client Server
- Max. No. of Client Connections
- 32
- Max. No. of Server Connections
- 32
- Max. No. of Information Objects
- 2000 points
IEC 60870-5-101
- Mode
- Master (Balanced/Unbalanced) Slave (Balanced/Unbalanced)
- Max. No. of Master Connections
- 1
- Max. No. of Slave Connections
- 1 (Balanced), 31 (Unbalanced)
- Max. No. of Information Objects
- 2000 points
Memory
- microSD Slot
- Up to 32 GB (SD 2.0 compatible)
Power Parameters
- Input Voltage
- 12 to 48 VDC
- Input Current
- 455 mA @ 12 VDC
- Power Connector
- Screw-fastened Euroblock terminal
Relays
- Contact Current Rating
- Resistive load: 2 A @ 30 VDC
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP30
- Dimensions
- 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
- Weight
- 507 g (1.12 lb)
Environmental Limits
- Operating Temperature
- 0 to 60°C (32 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class B
- EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF
- Safety
- EN 62368-1 UL 508
- Hazardous Locations
- ATEX Class I Division 2 IECEx
- Freefall
- IEC 60068-2-32
- Shock
- IEC 60068-2-27
- Vibration
- IEC 60068-2-6 IEC 60068-2-64
MTBF
- Time
- 1,140,815 hrs
- Standards
- Telcordia Standard SR-332
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
Need pricing on the MGate 5114 Series?
Tell us quantities and we'll come back with a quote.