ICF-1170I Series
Industrial CAN-to-fiber converters
Features and Benefits
- Transmits data up to 2 km over optical fiber
- Converts CAN signals to fiber and fiber to CAN signals
- Baudrate up to 1 Mbps
- Dual power inputs for redundancy
- DIP switch for 120 ohm terminal resistance
- DIP switch for fiber test mode
- LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
- Wide-temperature model available for -40 to 85°C environments
- Fully compatible with the ISO 11898 standard
Certifications
- UL Listed
- CE
- FCC
Introduction
The ICF-1170I Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with alarm contact relay to ensure that your CAN bus system will remain online.
Models in this series (2)
| — | ICF-1170I-M-ST | ICF-1170I-M-ST-T | — | — |
| Operating Temp. | 0 to 60°C | -40 to 85°C | ||
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for ICF-1170I-M-ST. Per-model differences are listed in the selection grid above.
Serial Interface
- Optical Fiber
- Read more Low-Speed Fiber Module Multi-Mode Fiber Cable Requirements 50/125 µm, 800 MHz 62.5/125 µm, 500 MHz Typical Distance 5 km Wavelength Typical (nm) 850 TX Range (nm) 840 to 860 RX Range (nm) 800 to 900 Optical Power TX Range (dBm) 0 to -5 RX Range (dBm) 0 to -20 Link Budget (dB) 15 Dispersion Penalty (dB) 1
CAN Interface
- Isolation
- 2 kV (built-in)
- No. of Ports
- 1
- Signals
- CAN_L, CAN_H, CAN Signal GND
- Terminator
- N/A, 120 ohms (by DIP)
Power Parameters
- Input Current
- 221 mA @ 12 to 48 VDC
- Power Consumption
- 221 mA @ 12 to 48 VDC
- Input Voltage
- 12 to 48 VDC
- No. of Power Inputs
- 2
- Overload Current Protection
- Supported
- Power Connector
- Terminal block (for DC models)
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP30
- Dimensions
- 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
- Weight
- 178 g (0.39 lb)
- Installation
- DIN-rail mounting
Environmental Limits
- Operating Temperature
- 0 to 60°C (32 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF
- Safety
- EN 62368-1, UL 508
- Environmental Testing
- IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3
- Vibration
- IEC 60068-2-6
MTBF
- Time
- 792,085 hrs
- Standards
- Telcordia (Bellcore), GB
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Declaration of Conformity for ICF-1170I Series299.5 KB | Declaration | v1.0 | May 29, 2024 |
| Datasheet for ICF-1170I Series899.7 KB | Datasheet | v1.3 | Dec 13, 2022 |
| QIG for ICF-1170I Series1.3 MB | QIG | v6.1 | May 04, 2021 |
| Tech Note for ICF-1170I Series202.7 KB | Tech Note | v1.0 | Apr 20, 2020 |
| 2D CAD for ICF-1170I293.2 KB | 2D CAD | — | May 20, 2016 |
Need pricing on the ICF-1170I Series?
Tell us quantities and we'll come back with a quote.