ICF-1171I Series
Industrial CAN-to-fiber converters for distance extension
Features and Benefits
- Transmits data for up to 40 km over optical fiber
- Converts CAN signals to fiber and vice versa
- Supports CAN 2.0A, CAN 2.0B, and CAN FD; conforms with the ISO 11898 standard
- CAN 2.0 supports auto-baudrate
- CAN 2.0 arbitration rate up to 1 Mbps
- CAN FD arbitration rate up to 1 Mbps; data rate up to 5 Mbps
- Dual power inputs for redundancy
- Wide-temperature model available for -40 to 75°C environments
- DIP switch for 120-ohm terminal resistance
- Rotary switches for CAN 2.0/CAN FD arbitration and data rate configuration
- LEDs for CAN bus diagnostics, fiber diagnostics, and power input status
Certifications
- CE
- FCC
- UL Listed
Introduction
The ICF-1171I Series CAN-to-fiber converters are used in pairs to connect two CAN 2.0 or two CAN FD devices or networks via single-mode or multi-mode optical fiber. The ICF-1171I provides 2-kV isolation protection for the CAN interface and dual power inputs to ensure that your CANbus system will work uninterrupted.
Models in this series (4)
| — | ICF-1171I-S-ST | ICF-1171I-S-ST-T | ICF-1171I-M-ST | ICF-1171I-M-ST-T |
| Operating Temp. | 0 to 60°C | -40 to 75°C | 0 to 60°C | -40 to 75°C |
| Fiber Module Type | Single-mode ST | Single-mode ST | Multi-mode ST | Multi-mode ST |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for ICF-1171I-M-ST. Per-model differences are listed in the selection grid above.
Serial Interface
- Optical Fiber
- Note: The “typical distance” of a specific fiber transceiver can be computer using Link budget (dB) > Dispersion penalty (dB) + Total link loss (dB).
CAN Interface
- Isolation
- 2 kV (built-in)
- No. of Ports
- 1
- Signals
- CAN_L, CAN_H, CAN Signal GND
- Terminator
- N/A, 120 ohms (by DIP)
- Protocols
- CAN 2.0A, CAN 2.0B, CAN FD, compatible with ISO 11898 standard (DIP switch to select CAN 2.0/CAN FD setting)
Fiber Interface
- No. of Ports
- 1
- Connector
- Multi-mode ST connector
- Optical Fiber
- Single-mode, typical distance 40 km Multi-mode, typical distance 2 km
Power Parameters
- Input Current
- 188.5 mA (max.)
- Input Voltage
- 12 to 48 VDC
- No. of Power Inputs
- 2
- Power Connector
- Terminal block
Relays
- Contact Current Rating
- Resistive load: 1 A @ 30 VDC
- Pinouts
- NC, COM, NO
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP30
- Dimensions
- 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
- Weight
- 294 g (0.65 lb)
- Installation
- DIN-rail mounting, Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature
- 0 to 60°C (32 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV, Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF
- International Approval
- KC
- Safety
- UL 62368-1, EN 62368-1
- Vibration
- IEC 60068-2-6
MTBF
- Time
- 2,412,885 hrs
- Standards
- Telcordia (Bellcore), GB
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Declaration of Conformity for ICF-1171I Series301.9 KB | Declaration | v1.0 | Mar 07, 2024 |
| QIG for ICF-1171I Series4.1 MB | QIG | v1.0 | Aug 30, 2022 |
| Datasheet for ICF-1171I Series1.4 MB | Datasheet | v1.0 | Aug 26, 2022 |
Need pricing on the ICF-1171I Series?
Tell us quantities and we'll come back with a quote.