ICF-1280I Series
Industrial PROFIBUS-to-fiber converters with redundant fiber ring
Features and Benefits
- Redundant fiber ring with zero recovery time
- Examines network-wide fiber communication from a single converter
- Auto baudrate detection and data speed of up to 12 Mbps
- PROFIBUS fail-safe prevents corrupted datagrams in functioning segments
- Alarm by relay output
- 2 kV galvanic isolation protection
- Dual power inputs for redundancy
- Extends PROFIBUS transmission distance up to 45 km
- Wide-temperature model available for -40 to 75°C environments
- Supports Fiber Signal Intensity Diagnosis
Certifications
- UL Listed
- CE
- FCC
Introduction
The ICF-1280I industrial PROFIBUS-to-fiber converters are used to convert PROFIBUS signals from copper to optical fiber. The converters are used to extend serial transmission up to 4 km (multi-mode fiber) or up to 45 km (single-mode fiber). The ICF-1280I Series provides 2 kV isolation protection for the PROFIBUS system and dual power inputs to ensure that your PROFIBUS device will perform uninterrupted.
Models in this series (4)
| — | ICF-1280I-M-ST | ICF-1280I-S-ST | ICF-1280I-M-ST-T | ICF-1280I-S-ST-T |
| Operating Temp. | 0 to 60°C | 0 to 60°C | -40 to 75°C | -40 to 75°C |
| Fiber Module Type | Multi-mode ST | Single-mode ST | Multi-mode ST | Single-mode ST |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for ICF-1280I-M-ST. Per-model differences are listed in the selection grid above.
Serial Interface
- Optical Fiber
- Read more Multi-Mode Single-Mode Wavelength 820 nm 1310 nm Tx Output -14 dBm -7 dBm Rx Sensitivity -28 dBm -29 dBm Link Budget 14 dBm 21 dBm Typical Distance 4 km 45 km
PROFIBUS Interface
- Baudrate
- 9600 bps to 12 Mbps
- Connector
- DB9 female
- Industrial Protocols
- PROFIBUS DP
- Isolation
- 2 kV (built-in)
- No. of Ports
- 1
Power Parameters
- Input Current
- 370 mA @ 12 to 48 VDC
- Input Voltage
- 12 to 48 VDC
- No. of Power Inputs
- 2
- Overload Current Protection
- Supported
- Power Connector
- Terminal block (for DC models)
- Power Consumption
- 370 mA @ 12 to 48 VDC
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP30
- Dimensions
- 39 x 115 x 70 mm (1.54 x 4.53 x 2.76 in)
- Weight
- 225 g (0.49 lb)
- Installation
- DIN-rail mounting
Environmental Limits
- Operating Temperature
- 0 to 60°C (32 to 140°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 0.5 kV IEC 61000-4-5 Surge: Power: 0.5 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 PFMF
- Environmental Testing
- IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3
- Hazardous Locations
- ATEX Class I Division 2 IECEx
- Maritime
- DNV
- Safety
- IEC 60950-1 UL 508
- Vibration
- IEC 60068-2-6
MTBF
- Time
- 1,870,854 hrs
- Standards
- Telcordia (Bellcore), GB
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Declaration of Conformity for ICF-1180I/1280I Series311.1 KB | Declaration | v1.0 | Mar 07, 2024 |
| Datasheet for ICF-1280I Series2.3 MB | Datasheet | v1.5 | Dec 19, 2022 |
| QIG for ICF-1280I Series2.2 MB | QIG | v5.2 | May 04, 2021 |
| 2D CAD for ICF-1280I300.5 KB | 2D CAD | — | May 20, 2016 |
Need pricing on the ICF-1280I Series?
Tell us quantities and we'll come back with a quote.