CSM-400 Series
Managed 10/100BaseT(X) to 100BaseFX slide-in modules for the NRack System™
Features and Benefits
- LFP (Link Fault Pass-Through) and FEF (Far End Fault)
- Supports store-and-forward mode and pass-through mode
- Auto-negotiation
- Supports IEEE 802.3AH OAM protocol
- Plug and play
- Hot-swappable
- IP-based remote management
- Supports WDM type modules
Certifications
- UL Listed
- CE
- FCC
Introduction
The CSM-400 Series consists of slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures, and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.
Models in this series (10)
| — | CSM-400-1213 | CSM-400-1213-T | CSM-400-1214 | CSM-400-1214-T |
| Operating Temp. | -20 to 55°C | -40 to 75°C | -20 to 55°C | -40 to 75°C |
| Fiber Module Type | Multi-mode ST | Multi-mode ST | Multi-mode SC | Multi-mode SC |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | CSM-400-1218 | CSM-400-1218-T | CSM-400-1224 | CSM-400-1224-T |
| Operating Temp. | -20 to 55°C | -40 to 75°C | -20 to 55°C | -40 to 75°C |
| Fiber Module Type | Single-mode SC | Single-mode SC | WDM-A single-mode SC | WDM-A single-mode SC |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | CSM-400-1225 | CSM-400-1225-T | — | — |
| Operating Temp. | -20 to 55°C | -40 to 75°C | ||
| Fiber Module Type | WDM-B single-mode SC | WDM-B single-mode SC | ||
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for CSM-400-1213. Per-model differences are listed in the selection grid above.
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 1
- 100BaseFX Ports (multi-mode ST connector)
- 1
- Optical Fiber
- Read more 100BaseFX 100 BaseFX WDM-A 100 BaseFX WDM-B Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km 20 km 20 km Wavelength Typical (nm) 1300 1310 1310/1550 1550/1310 TX Range (nm) 1260 to 1360 1280 to 1340 1280 to 1340 1480 to 1600 RX Range (nm) 1100 to 1600 1100 to 1600 1480 to 1600 1280 to 1340 Optical Power TX Range (dBm) -10 to -20 0 to -5 -5 to 15 -5 to 15 RX Range (dBm) -3 to -32 -3 to -34 -3 to -32 -3 to -32 Link Budget (dB) 12 29 17 17 Dispersion Penalty (dB) 3 1 1 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
- Magnetic Isolation Protection
- 1.5 kV (built-in)
- Standards
- IEEE 802.3u for 100BaseT(X) and 100BaseFX
Security Functions
- Authentication
- Local database (password only)
- Encryption
- HTTPS AES-128 RSA-1024 SHA-1 SHA-256
- Security Protocols
- SSHv2 HTTPS (TLS 1.2)
Power Parameters
- Input Current
- 220 mA @ 12 VDC
- Input Voltage
- 12 VDC
- Overload Current Protection
- Supported
- Power Consumption
- 220 mA @ 12 VDC
Physical Characteristics
- Dimensions
- 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
- Weight
- Product only: 115 g (0.25 lb)
Environmental Limits
- Operating Temperature
- -20 to 55°C (-4 to 131°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV(AC), 1 kV(DC); Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11
- Environmental Testing
- IEC 60068-2-1 IEC 60068-2-14 IEC 60068-2-2 IEC 60068-2-3
- Safety
- EN 62368-1 UL 62368-1
- Vibration
- IEC 60068-2-6
MTBF
- Time
- 1,454,560 hrs
- Standards
- Telcordia (Bellcore), GB
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Firmware for CSM-400 Series841.5 KB | Firmware | v1.2 | Mar 26, 2019 Mar 26, 2019 Release notes |
| Software Package for CSM-400 Series (MIB file)41.0 KB | Software Package | v1.1 | Nov 16, 2017 Nov 16, 2017 Release notes |
| Declaration of Conformity (EU/UK) for TRC-2190 (with CSM-400)300.5 KB | Declaration | v1.1 | Aug 27, 2026 |
| Datasheet for CSM-400 Series1.1 MB | Datasheet | v1.3 | Mar 18, 2024 |
| QIG for CSM-400 Series1.3 MB | QIG | v1.2 | Aug 13, 2021 |
| Manual for CSM-400 Series2.6 MB | Manual | v1.0 | Mar 06, 2019 |
| 2D CAD for CSM-400-SC204.3 KB | 2D CAD | — | Jan 25, 2017 |
| 2D CAD for CSM-400-ST204.7 KB | 2D CAD | — | Jan 25, 2017 |
Need pricing on the CSM-400 Series?
Tell us quantities and we'll come back with a quote.