IMC-P101 Series
PoE Ethernet-to-fiber media converters
Features and Benefits
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
- IEEE 802.3af and PoE standard compliance
- IEEE 802.3at and PoE+ standard compliance (HW Rev. 1.1.0 and later )
- Power failure alarm by relay output
- Supports store-and-forward mode and pass-through mode
- -40 to 75°C operating temperature range (-T model)
- Redundant dual DC power inputs
Certifications
- UL Listed
- CE
- FCC
Introduction
IMC-P101 Ethernet-to-fiber media converters provide Ethernet media conversion from 10/100BaseT(X) to 100BaseFX (with SC or ST connectors). These converters are classified as power source equipment (PSE), and when used in this way, they provide up to 30 Watts to powered devices (PDs), eliminating the need for additional wiring. The IMC-P101 converters support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing, providing a complete solution for your industrial Ethernet network.
Models in this series (8)
| — | IMC-P101-M-SC | IMC-P101-M-ST | IMC-P101-S-SC | IMC-P101-S-ST |
| Operating Temp. | 0 to 60°C | 0 to 60°C | 0 to 60°C | 0 to 60°C |
| Fiber Module Type | Multi-mode SC | Multi-mode ST | Single-mode SC | Single-mode ST |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | IMC-P101-M-SC-T | IMC-P101-M-ST-T | IMC-P101-S-SC-T | IMC-P101-S-ST-T |
| Operating Temp. | -40 to 75°C | -40 to 75°C | -40 to 75°C | -40 to 75°C |
| Fiber Module Type | Multi-mode SC | Multi-mode ST | Single-mode SC | Single-mode ST |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for IMC-P101-M-SC. Per-model differences are listed in the selection grid above.
Ethernet Interface
- 100BaseFX Ports (multi-mode SC connector)
- 1
- Optical Fiber
- Read more 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
- Magnetic Isolation Protection
- 1.5 kV (built-in)
- PoE Ports (10/100BaseT(X), RJ45 connector)
- 1
Power Parameters
- Input Current
- 360 mA @ 12 to 57 VDC (HW Rev. 1.1.0 and later) 430 mA @ 46 to 57 VAC (HW Rev. 1.0.1 and prior)
- Input Voltage
- 12 to 57 VDC (HW Rev. 1.1.0 and later) 46 to 57 VDC (HW Rev. 1.0.1 and prior)
- Overload Current Protection
- Supported
Physical Characteristics
- Housing
- Metal
- Dimensions
- 144.5 x 122.3 x 51.65 mm (5.69 x 4.81 x 2.03 in)
- Weight
- Product only: 532 g (1.17 lb) Packaged: 701 g (1.55 lb)
- Installation
- DIN-rail mounting
Environmental Limits
- Operating Temperature
- 0 to 60°C (32 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 KHz to 80 MHz: 3 to 1 V IEC 61000-4-8 PFMF
- Environmental Testing
- IEC 60068-2-2 IEC 60068-2-3
- Safety
- UL 508 EN 62368-1
- Vibration
- IEC 60068-2-6
MTBF
- Time
- 2,892,595 hrs
- Standards
- Telcordia SR332
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Declaration of Conformity for IMC-P101 Series305.8 KB | Declaration | v1.0 | Mar 13, 2024 |
| Datasheet for IMC-P101 Series1.1 MB | Datasheet | v2.1 | Feb 13, 2023 |
| QIG for IMC-P101 Series2.3 MB | QIG | v4.2 | Apr 11, 2022 |
| 2D CAD for IMC-P101-SC159.8 KB | 2D CAD | — | May 14, 2014 |
| 2D CAD for IMC-P101-ST269.9 KB | 2D CAD | — | May 14, 2014 |
Need pricing on the IMC-P101 Series?
Tell us quantities and we'll come back with a quote.