IMC-P21GA-G2 Series
PoE+ Gigabit Ethernet-to-fiber media converters
Features and Benefits
- 10/100/1000BaseT(X) auto-negotiation and auto-MDI/MDI-X
- IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standard compliance
- Up to 36 W output on the PoE+ port
- Supports store-and-forward mode and pass-through mode
- Supports 16 KB jumbo frames
- Redundant dual DC power inputs
Certifications
- UL Listed
- CE
- FCC
Introduction
IMC-P21GA-G2 PoE+ Gigabit Ethernet-to-fiber media converters are designed to provide reliable and stable 10/100/1000BaseT(X)-to-100/ 1000Base-SX/LX or selected 100/1000Base SFP module media conversions. These converters are classified as power source equipment (PSE) and are used to directly power up powered devices (PDs), eliminating the need for additional wiring. The IMC-P21GA-G2 PoE+ Gigabit Ethernet-to-fiber media converters provide up to 30 watts of power on the PoE+ port in standard mode and allow high-power output of up to 36 watts for heavy-duty industrial PoE devices, such as weather-proof IP surveillance cameras with wipers/heaters, high-performance wireless access points, and IP phones. The IMC-P21GA-G2 media converters are highly versatile, and with SFP fiber ports, can transmit data high EMI immunity for up to 80 km from the device to the control center. The PoE+ Gigabit Ethernet-to-fiber media converters support a variety of useful functions, as well as jumbo frames, PoE diagnostics, Link Fault Pass-through, store-and-forward mode, and pass-through mode. The IMC-P21GA-G2 converters support IEEE 802.3/802.3u/802.3x with 10/100/1000M and MDI/ MDI-X auto-sensing, providing a complete solution for your industrial Ethernet networks.
Models in this series (3)
| — | IMC-P21GA-G2 | IMC-P21GA-G2-SX-SC | IMC-P21GA-G2-LX-SC | — |
| Operating Temperature | –10 to 60°C | –10 to 60°C | –10 to 60°C | |
| Fiber Module Type | SFP | Multi-mode SC | Single-mode SC | |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for IMC-P21GA-G2. Per-model differences are listed in the selection grid above.
Ethernet Interface
- 100/1000BaseSFP Ports
- IMC-P21GA-G2 models: 1
- 1000BaseSX Ports (multi-mode SC connector)
- IMC-P21GA-G2-SX-SC models: 1
- 1000BaseLX Ports (single-mode SC connector)
- IMC-P21GA-G2-LX-SC models: 1
- PoE Ports (10/100/1000BaseT(X), RJ45 connector)
- 1
- Optical Fiber
- Read more Fiber Module Optical Interface Multi-mode Single-mode Fiber Data Rate 1000Base-SX 1000Base-LX Fiber Cable Requirements 62.5/125 µm 50/125 µm 9/125 µm OM1 OM2/OM3/OM4 OS1/OS2 Typical Distance 550 m 550 m 10 km Wavelength Typical (nm) 850 850 1310 TX Range (nm) 830 to 870 830 to 870 1280 to 1340 RX Range (nm) 770 to 870 770 to 870 1100 to 1600 Optical Power TX Range (dbm) -3 to -10 -3 to -10 -3 to 9 RX Range (dbm) -3 to -20 -3 to -20 -3 to -21 Link Budget (dB) 10 10 12 Dispersion Penalty (dB) 3 3 1 Note: 1. When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. 2. Compute the “Typical Distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
- Magnetic Isolation Protection
- 1.5 kV (built-in)
- Jumbo Frame Size
- 16 KB
Power Parameters
- Input Voltage
- 44 to 57 VDC PoE+ output: >52 VDC recommended PoE output: >44 VDC recommended
- Power Consumption
- Max 828 mA
- Overload Current Protection
- Supported
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP40 (with I/O modules attached)
- Dimensions
- 90 x 73 x 20.3 mm (3.54 x 2.87 x 0.79 in)
- Weight
- Product Only: 212 g (0.47 lb)
- Installation
- DIN-rail mounting
Environmental Limits
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz; Signal: 10 V IEC 61000-4-8 PFMF
- Shock
- IEC 60068-2-27
- Vibration
- IEC 60068-2-6 IEC 60068-2-64
- Freefall
- ISTA 1A
- TSN
- CC-Link IE TSN Class B
MTBF
- Time
- 8,709,561 hrs
- Standards
- Telcordia Standard SR-332
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Datasheet for IMC-P21GA-G2 Series1.1 MB | Datasheet | v2.0 | Feb 04, 2026 |
| QIG for IMC-P21GA-G2 Series2.2 MB | QIG | v1.1 | Oct 01, 2024 |
| Declaration of Conformity for IMC-P21A-G2/P21GA-G2 Series308.6 KB | Declaration | v1.0 | Jul 16, 2024 |
Need pricing on the IMC-P21GA-G2 Series?
Tell us quantities and we'll come back with a quote.