EDS-405A Series
5-port entry-level managed Ethernet switches
Features and Benefits
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy
- IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported
- Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01
- PROFINET or EtherNet/IP enabled by default (PN or EIP models)
- Supports MXstudio for easy, visualized industrial network management
Certifications
- DNV GL
- ATEX
- CE
- FCC
Introduction
The EDS-405A Series is designed especially for industrial applications. The switches support a variety of useful management functions, such as Turbo Ring, Turbo Chain, ring coupling, IGMP snooping, IEEE 802.1Q VLAN, port-based VLAN, QoS, RMON, bandwidth management, port mirroring, and warning by email or relay. The ready-to-use Turbo Ring can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the EDS-405A switches.
Models in this series (14)
| — | EDS-405A | EDS-405A-T | EDS-405A-MM-ST | EDS-405A-MM-ST-T |
| Layer | 2 | 2 | 2 | 2 |
| Total No. of Ports | 5 | 5 | 5 | 5 |
| 10/100BaseT(X) Ports RJ45 Connector | 5 | 5 | 3 | 3 |
| 100BaseFX Ports Multi-Mode SC Connector | – | – | – | – |
| 100BaseFX Ports Multi-Mode ST Connector | – | – | 2 | 2 |
| 100BaseFX Ports Single-Mode SC Connector | – | – | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-405A-MM-SC | EDS-405A-MM-SC-T | EDS-405A-SS-SC | EDS-405A-SS-SC-T |
| Layer | 2 | 2 | 2 | 2 |
| Total No. of Ports | 5 | 5 | 5 | 5 |
| 10/100BaseT(X) Ports RJ45 Connector | 3 | 3 | 3 | 3 |
| 100BaseFX Ports Multi-Mode SC Connector | 2 | 2 | – | – |
| 100BaseFX Ports Multi-Mode ST Connector | – | – | – | – |
| 100BaseFX Ports Single-Mode SC Connector | – | – | 2 | 2 |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-405A-EIP | EDS-405A-EIP-T | EDS-405A-PN | EDS-405A-PN-T |
| Layer | 2 | 2 | 2 | 2 |
| Total No. of Ports | 5 | 5 | 5 | 5 |
| 10/100BaseT(X) Ports RJ45 Connector | 5 | 5 | 5 | 5 |
| 100BaseFX Ports Multi-Mode SC Connector | – | – | – | – |
| 100BaseFX Ports Multi-Mode ST Connector | – | – | – | – |
| 100BaseFX Ports Single-Mode SC Connector | – | – | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-405A-PTP | EDS-405A-PTP-T | — | — |
| Layer | 2 | 2 | ||
| Total No. of Ports | 5 | 5 | ||
| 10/100BaseT(X) Ports RJ45 Connector | 5 | 5 | ||
| 100BaseFX Ports Multi-Mode SC Connector | – | – | ||
| 100BaseFX Ports Multi-Mode ST Connector | – | – | ||
| 100BaseFX Ports Single-Mode SC Connector | – | – | ||
| Operating Temp. | -10 to 60°C | -40 to 75°C | ||
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for EDS-405A. Per-model differences are listed in the selection grid above.
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 5 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
- Optical Fiber
- Read more 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
- Standards
- IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging IEEE 802.1w for Rapid Spanning Tree Protocol
Ethernet Software Features
- Filter
- 802.1Q VLAN GMRP GVRP IGMP v1/v2 Port-based VLAN
- Industrial Protocols
- EtherNet/IP Modbus TCP
- Management
- Back Pressure Flow Control BOOTP DHCP Option 66/67/82 DHCP Server/Client Flow control IPv4/IPv6 LLDP Port Mirror RARP RMON SMTP SNMP Inform SNMPv1/v2c/v3 Syslog Telnet TFTP
- MIB
- Bridge MIB Ethernet-like MIB MIB-II P-BRIDGE MIB RMON MIB Groups 1, 2, 3, 9 RSTP MIB
- Redundancy Protocols
- RSTP STP Turbo Chain Turbo Ring v1/v2
- Security
- Broadcast storm protection HTTPS/SSL NTP authentication Port Lock SNMPv3 SSH Trust access control
- Time Management
- NTP Server/Client SNTP
Switch Properties
- IGMP Groups
- 256
- MAC Table Size
- 2 K
- Max. No. of VLANs
- 64
- Packet Buffer Size
- 1 Mbits
- Priority Queues
- 4
- VLAN ID Range
- VID 1 to 4094
Serial Interface
- Console Port
- RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)
DIP Switch Configuration
- Ethernet Interface
- Turbo Ring, Master, Coupler, Reserve
Input/Output Interface
- Alarm Contact Channels
- Relay output with current carrying capacity of 1 A @ 24 VDC
Power Parameters
- Input Voltage
- 12/24/48 VDC Redundant dual inputs
- Operating Voltage
- 9.6 to 60 VDC
- Input Current
- 0.594 A @ 12 VDC 0.286 A @ 24 VDC 0.154 A @ 48 VDC
- Overload Current Protection
- Supported
- Reverse Polarity Protection
- Supported
- Connection
- 1 removable 6-contact terminal block(s)
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP30
- Dimensions
- 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
- Weight
- 650 g (1.44 lb)
- Installation
- DIN-rail mounting Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- Safety
- UL 508 UL 60950-1 EN 62368-1
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Hazardous Locations
- ATEX Class I Division 2
- Railway
- EN 50121-4
- Traffic Control
- NEMA TS2
- Vibration
- IEC 60068-2-6
- Shock
- IEC 60068-2-27
- Freefall
- IEC 60068-2-31
- Maritime
- DNV LR
MTBF
- Time
- 1,547,941 hrs
- Standards
- Telcordia (Bellcore), GB
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
Need pricing on the EDS-405A Series?
Tell us quantities and we'll come back with a quote.