EDS-518E Series
14+4G-port Gigabit managed Ethernet switches
Features and Benefits
- 4 Gigabit plus 14 fast Ethernet ports for copper and fiber
- Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and MSTP for network redundancy
- RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1X, MAC ACL, HTTPS, SSH, and sticky MAC-addresses to enhance network security
- EtherNet/IP, PROFINET, and Modbus TCP protocols supported for device management and monitoring
- Fiber Check™—comprehensive fiber status monitoring and warning on MST/MSC/SSC/SFP fiber ports
- Supports MXstudio for easy, visualized industrial network management
- V-ON™ ensures millisecond-level multicast data and video network recovery
Certifications
- DNV GL
- ATEX
- CE
- FCC
Introduction
The EDS-518E standalone, compact 18-port managed Ethernet switches have 4 combo Gigabit ports with built-in RJ45 or SFP slots for Gigabit fiber-optic communication. The 14 fast Ethernet ports have a variety of copper and fiber port combinations that give the EDS-518E Series greater flexibility for designing your network and application. The Ethernet redundancy technologies Turbo Ring, Turbo Chain, RSTP/STP, and MSTP increase the system reliability and availability of your network backbone. The EDS-518E also supports advanced management and security features. In addition, the EDS-518E Series is designed specifically for harsh industrial environments with limited installation space and high protection level requirements, such as maritime, rail wayside, oil and gas, factory automation, and process automation.
Models in this series (8)
| — | EDS-518E-4GTXSFP | EDS-518E-4GTXSFP-T | EDS-518E-MM-SC-4GTXSFP | EDS-518E-MM-SC-4GTXSFP-T |
| 10/100BaseT(X) Ports RJ45 Connector | 14 | 14 | 12 | 12 |
| Combo Ports 10/100/1000BaseT(X) or 100/1000BaseSFP+ | 4 | 4 | 4 | 4 |
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | 2 | 2 |
| 100BaseFX Ports Multi-Mode, ST Connector | – | – | – | – |
| 100BaseFX Ports Single-Mode, SC Connector | – | – | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-518E-MM-ST-4GTXSFP | EDS-518E-MM-ST-4GTXSFP-T | EDS-518E-SS-SC-4GTXSFP | EDS-518E-SS-SC-4GTXSFP-T |
| 10/100BaseT(X) Ports RJ45 Connector | 12 | 12 | 12 | 12 |
| Combo Ports 10/100/1000BaseT(X) or 100/1000BaseSFP+ | 4 | 4 | 4 | 4 |
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | – | – |
| 100BaseFX Ports Multi-Mode, ST Connector | 2 | 2 | – | – |
| 100BaseFX Ports Single-Mode, SC Connector | – | – | 2 | 2 |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for EDS-518E-4GTXSFP. Per-model differences are listed in the selection grid above.
Input/Output Interface
- Alarm Contact Channels
- 1 Relay output with current carrying capacity of 1 A @ 24 VDC
- Buttons
- Reset button
- Digital Input Channels
- 1
- Digital Inputs
- +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 14 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
- Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+)
- 4
- 10/100/1000BaseT(X) Ports (RJ45 connector)
- Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
- Optical Fiber
- Read more 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
- Standards
- IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseSX/LX/LHX/ZX IEEE 802.3x for flow control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication IEEE 802.3ad for Port Trunk with LACP
Ethernet Software Features
- Filter
- 802.1Q VLAN BPDU Filter BPDU Guard GMRP GVRP IGMP v1/v2/v3 Port-based VLAN
- Industrial Protocols
- EtherNet/IP Modbus TCP PROFINET IO Device
- Management
- LLDP Back Pressure Flow Control BOOTP Port Mirroring DHCP Option 66/67/82 DHCP Server/Client Fiber check Flow control IPv4/IPv6 RARP RMON SCP SMTP SNMP Inform SNMPv1/v2c/v3 Syslog Telnet TFTP
- MIB
- Ethernet-like MIB MIB-II Bridge MIB P-BRIDGE MIB Q-BRIDGE MIB RMON MIB Groups 1, 2, 3, 9 RSTP MIB
- Redundancy Protocols
- Link Aggregation MRP MSTP RSTP STP Turbo Chain Turbo Ring v1/v2
- Security
- Broadcast storm protection HTTPS/SSL TACACS+ SNMPv3 MAB authentication Sticky MAC NTP authentication MAC ACL Port Lock RADIUS SSH SMTP with TLS
- Time Management
- NTP Server/Client SNTP
Switch Properties
- IGMP Groups
- 2048
- MAC Table Size
- 16 K
- Max. No. of VLANs
- 64
- Packet Buffer Size
- 1 Mbits
- Priority Queues
- 4
- VLAN ID Range
- VID 1 to 4094
USB Interface
- Storage Port
- USB Type A
LED Interface
- LED Indicators
- PWR1, PWR2, STATE, FAULT, 10/100M (TP port), 100M (fiber port), Gigabit combo port, MSTR/HEAD, CPLR/TAIL
Serial Interface
- Console Port
- USB-serial console (Type B connector)
DIP Switch Configuration
- DIP Switches
- Turbo Ring, Master, Coupler, Reserve
Power Parameters
- Connection
- 2 removable 4-contact terminal block(s)
- Input Current
- 0.45 A @ 24 VDC
- Input Voltage
- 12/24/48/-48 VDC Redundant dual inputs
- Operating Voltage
- 9.6 to 60 VDC
- Overload Current Protection
- Supported
- Reverse Polarity Protection
- Supported
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP30
- Dimensions
- 94 x 135 x 137 mm (3.7 x 5.31 x 5.39 in)
- Weight
- 1630 g (3.59 lb)
- Installation
- DIN-rail mounting Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- Safety
- UL 508
- EMC
- EN 55032/35 EN 61000-6-2/-6-4
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Hazardous Locations
- ATEX Class I Division 2
- Power Substation
- IEC 61850-3 IEEE 1613
- Railway
- EN 50121-4
- Traffic Control
- NEMA TS2
- Vibration
- IEC 60068-2-6
- Shock
- IEC 60068-2-27
- Freefall
- IEC 60068-2-32
- Maritime
- LR ABS DNV NK
MTBF
- Standards
- Telcordia (Bellcore), GB
- Time
- 865,559 hrs
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
Need pricing on the EDS-518E Series?
Tell us quantities and we'll come back with a quote.