PT-G503 Series
IEC 61850-3/62439-3 3-port full Gigabit managed redundancy boxes
Features and Benefits
- IEC 61850-3, IEEE 1613 (power substations) compliant
- IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
- PRP/HSR Coupling and QuadBox functions supported
- Ethernet console reserved for local access
- Built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA
- Hardware-based IEEE 1588v2 PTP supported
- Design ready for NERC CIP compliant system development
- Power inputs with universal 24 VDC, 48 VDC, or 110/220 VDC/VAC power supply range
- -40 to 85°C operating temperature range
Certifications
- Iec61850 3 Ieee1613 Black
- En50121 4
- CE
- FCC
Introduction
The PT-G503-PHR-PTP Series redundancy boxes (RedBoxes) are compliant with the latest standardized redundancy protocols for industrial automation networks, IEC 62439-3 Clause 4 (Parallel Redundancy Protocol, PRP) and IEC 62439-3 Clause 5 (High-availability Seamless Redundancy, HSR). PRP/HSR ensures the highest system availability and data integrity for mission-critical applications in electrical substation and/or process automation systems that require zero recovery time redundancy. The redundant protocols Coupling and QuadBox are also supported. With Coupling and QuadBox, HSR rings can be connected to make the redundant network more versatile. The PT-G503-PHR-PTP Series comes with three 10/100/1000BaseT(X) and 100/1000BaseSFP slot combo ports. One slot (INTERLINK port) is for an internal link for connecting with a SAN (Singly Attached Node). The other two ports (LAN A and LAN B ports) are for PRP/HSR redundant protocol communications. With this full Gigabit Ethernet port design, the PT-G503-PHR-PTP Series provides high performance for PRP/HSR systems. The PT-G503-PHR-PTP Series also provides IEEE 1588v2 PTP in end-to-end one-step transparent clock mode for time-critical applications and power inputs with 24/48 VDC or 110/220 VDC/VAC ranges to increase the reliability of the power supply.
Models in this series (2)
| — | PT-G503-PHR-PTP-WV | PT-G503-PHR-PTP-HV | — | — |
| Max. No. of Ports | 3 | 3 | ||
| Max. No. of Gigabit Ports | 3 | 3 | ||
| Combo Ports 10/100/1000BaseT(X) or 100/1000BaseSFP | 3 | 3 | ||
| Input Voltage | 24/48 VDC | 110/220 VDC/VAC | ||
| Operating Temp. | -45 to 85°C | -45 to 85°C | ||
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for PT-G503-PHR-PTP-HV. Per-model differences are listed in the selection grid above.
Ethernet Interface
- Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+)
- 3
- Console Port
- Ethernet console (10/100/1000Mbps RJ45)
- Standards
- IEEE 802.3 for 10BaseT IEEE 802.3ab for 1000BaseT(X) IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
Ethernet Software Features
- Filter
- Static Multicast
- Management
- Back Pressure Flow Control, BOOTP, DHCP Client, Fiber check, Flow control, HTTP, IPv4/IPv6, LLDP, Port Mirror, RARP, RMON, SMTP, SNMP Inform, SNMPv1/v2c/v3, Syslog, Telnet
- Power Substation
- MMS
- Redundancy Protocols
- HSR, PRP, RSTP grouping
- Security
- HTTPS/SSL, TACACS+, RADIUS, SSH, Trust access control
- Time Management
- NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based)
- MIB
- IEC 62439-3 MIB
USB Interface
- Storage Port
- USB Type A
Serial Interface
- Console Port
- USB-serial console (Type B connector)
Input/Output Interface
- Alarm Contact Channels
- Resistive load: 1 A @ 24 VDC
- Digital Inputs
- +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA
Power Parameters
- Input Current
- 0.260/0.170 A @ 110/220 VAC 0.150/0.080 A @ 110/220 VDC
- Input Voltage
- 110/220 VAC/VDC (85 to 264 VAC, 88 to 300 VDC)
- Power Connector
- 1 removable 5-contact terminal block(s)
- Overload Current Protection
- Supported
- Reverse Polarity Protection
- Supported
Physical Characteristics
- Housing
- Aluminum
- IP Rating
- IP40
- Dimensions (without ears)
- 80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in)
- Weight
- 1210 g (2.69 lb)
- Installation
- DIN-rail mounting
Environmental Limits
- Operating Temperature
- -40 to 85°C (-40 to 185°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- Safety
- UL 508
- EMI
- EN 55032 Class A, CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs
- Power Substation
- IEC 61850-3, IEEE 1613
- Railway
- EN 50121-4
MTBF
- Time
- 566,844 hrs
- Standards
- Telcordia (Bellcore) Standard TR/SR
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
Need pricing on the PT-G503 Series?
Tell us quantities and we'll come back with a quote.