EDS-P206A Series
6-port unmanaged Ethernet switches with 4 IEEE 802.3af/at PoE+ ports
Features and Benefits
- IEEE 802.3af/at compliant PoE and Ethernet combo ports
- Up to 30 W output per PoE port
- 12/24/48 VDC redundant power inputs
- Intelligent power consumption detection and classification
- Redundant dual VDC power inputs
- -40 to 75°C operating temperature range (-T models)
Certifications
- UL Listed
- CE
- FCC
Introduction
The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3af/at-compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network.
Models in this series (14)
| — | EDS-P206A-4PoE | EDS-P206A-4PoE-T | EDS-P206A-4PoE-M-SC | EDS-P206A-4PoE-M-SC-T |
| 10/100BaseT(X) Ports RJ45 Connector | 2 | 2 | 1 | 1 |
| PoE Ports, 10/100BaseT(X) RJ45 Connector | 4 | 4 | 4 | 4 |
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | 1 | 1 |
| 100BaseFX Ports Multi-Mode, ST Connector | – | – | – | – |
| 100BaseFX Ports Single-Mode, SC Connector | – | – | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-P206A-4PoE-M-ST | EDS-P206A-4PoE-M-ST-T | EDS-P206A-4PoE-MM-SC | EDS-P206A-4PoE-MM-SC-T |
| 10/100BaseT(X) Ports RJ45 Connector | 1 | 1 | – | – |
| PoE Ports, 10/100BaseT(X) RJ45 Connector | 4 | 4 | 4 | 4 |
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | 2 | 2 |
| 100BaseFX Ports Multi-Mode, ST Connector | 1 | 1 | – | – |
| 100BaseFX Ports Single-Mode, SC Connector | – | – | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-P206A-4PoE-MM-ST | EDS-P206A-4PoE-MM-ST-T | EDS-P206A-4PoE-S-SC | EDS-P206A-4PoE-S-SC-T |
| 10/100BaseT(X) Ports RJ45 Connector | – | – | 1 | 1 |
| PoE Ports, 10/100BaseT(X) RJ45 Connector | 4 | 4 | 4 | 4 |
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | – | – |
| 100BaseFX Ports Multi-Mode, ST Connector | 2 | 2 | – | – |
| 100BaseFX Ports Single-Mode, SC Connector | – | – | 1 | 1 |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-P206A-4PoE-SS-SC | EDS-P206A-4PoE-SS-SC-T | — | — |
| 10/100BaseT(X) Ports RJ45 Connector | – | – | ||
| PoE Ports, 10/100BaseT(X) RJ45 Connector | 4 | 4 | ||
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | ||
| 100BaseFX Ports Multi-Mode, ST Connector | – | – | ||
| 100BaseFX Ports Single-Mode, SC Connector | 2 | 2 | ||
| Operating Temp. | -10 to 60°C | -40 to 75°C | ||
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for EDS-P206A-4PoE. Per-model differences are listed in the selection grid above.
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 2 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
- PoE Ports (10/100BaseT(X), RJ45 connector)
- 4 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
- Standards
- IEEE 802.3 for 10BaseT IEEE 802.3af/at for PoE/PoE+ output IEEE 802.3x for flow control IEEE 802.3u for 100BaseT(X)
- PoE Pinout
- V+, V+, V-, V- for pins 1, 2, 3, 6 (Endspan, MDI, Mode A)
- Optical Fiber
- Read more 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
Switch Properties
- Packet Buffer Size
- 768 kbits
- MAC Table Size
- 2 K
- Processing Type
- Store and Forward
Power Parameters
- Input Current
- 5.55 A @ 24 VDC
- Connection
- 1 removable 4-contact terminal block(s)
- Operating Voltage
- 12 to 57 VDC
- Input Voltage
- 12/24/48 VDC Redundant dual inputs
- Power Budget
- Max. 120 W for total PD consumption Max. 30 W for each PoE port
- Power Consumption (Max.)
- Max. 13.2 W full loading without PDs’ consumption
- Reverse Polarity Protection
- Supported
- Overload Current Protection
- Supported
Physical Characteristics
- Housing
- Metal
- IP Rating
- IP30
- Dimensions
- 50.3 x 114 x 70 mm (1.98 x 4.53 x 2.76 in)
- Weight
- 375 g (0.83 lb)
- Installation
- DIN-rail mounting Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMI
- CISPR 32, FCC Part 15B Class A
- EMC
- EN 55032/24
- EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Safety
- UL 508
- Shock
- IEC 60068-2-27
- Freefall
- IEC 60068-2-31
- Vibration
- IEC 60068-2-6
MTBF
- Time
- 1,398,743 hrs
- Standards
- Telcordia (Bellcore), GB
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Datasheet for EDS-P206A Series705.7 KB | Datasheet | v1.2 | Sep 10, 2025 |
| Declaration of Conformity (EU/UK) for EDS-P206A Series316.5 KB | Declaration | v1.0 | Apr 08, 2024 |
| QIG for EDS-P206A Series1.4 MB | QIG | v4.3 | May 14, 2021 |
| Tech Note: Recommended Procedure for STP Cable Grounding on Moxa's Industrial Ethernet Switches558.3 KB | Tech Note | v1.0 | Feb 12, 2019 |
| 2D CAD for EDS-P206A-4PoE-M219.1 KB | 2D CAD | — | Jan 19, 2018 |
| 2D CAD for EDS-P206A-4PoE237.8 KB | 2D CAD | — | Jan 19, 2018 |
| 2D CAD for EDS-P206A-4PoE-MM200.5 KB | 2D CAD | — | Jan 19, 2018 |
Need pricing on the EDS-P206A Series?
Tell us quantities and we'll come back with a quote.