EDS-205A Series
5-port compact unmanaged Ethernet switches
Features and Benefits
- 10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/single-mode, SC or ST connector)
- Redundant dual 12/24/48 VDC power inputs
- IP30 aluminum housing
- Rugged hardware design well suited for hazardous locations (Class I Div. 2/ATEX Zone 2), transportation (NEMA TS2/EN 50121-4), and maritime environments (DNV/LR/ABS/NK)
- -40 to 75°C wide operating temperature range (-T models)
- Compliant with PROFINET Conformance Class A
Certifications
- DNV
- ATEX
- CE
- FCC
Introduction
The EDS-205A Series 5-port industrial Ethernet switches support IEEE 802.3 and IEEE 802.3u/x with 10/100M full/half-duplex, MDI/MDI-X auto-sensing. The EDS-205A Series has 12/24/48 VDC (9.6 to 60 VDC) redundant power inputs that can be connected simultaneously to live DC power sources. These switches have been designed for harsh industrial environments, such as in maritime (DNV/LR/ABS/NK), rail wayside, highway, or mobile applications (EN 50121-4/NEMA TS2), or hazardous locations (Class I Div. 2, ATEX Zone 2, IECEx) that comply with FCC, UL, and CE standards. The EDS-205A switches are available with a standard operating temperature range from -10 to 60°C, or with a wide operating temperature range from -40 to 75°C. All models are subjected to a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications. In addition, the EDS-205A switches have DIP switches for enabling or disabling broadcast storm protection and Quality of Service, providing another level of flexibility for industrial applications. The EDS-205A Series is also compliant with PROFINET Conformance Class A (CC-A), making these switches suitable for PROFINET networks.
Models in this series (8)
| — | EDS-205A | EDS-205A-T | EDS-205A-M-SC | EDS-205A-M-SC-T |
| 10/100BaseT(X) Ports RJ45 Connector | 5 | 5 | 4 | 4 |
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | 1 | 1 |
| 100BaseFX Ports Multi-Mode, ST Connector | – | – | – | – |
| 100BaseFX Ports Single-Mode, SC Connector | – | – | – | – |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
| — | EDS-205A-M-ST | EDS-205A-M-ST-T | EDS-205A-S-SC | EDS-205A-S-SC-T |
| 10/100BaseT(X) Ports RJ45 Connector | 4 | 4 | 4 | 4 |
| 100BaseFX Ports Multi-Mode, SC Connector | – | – | – | – |
| 100BaseFX Ports Multi-Mode, ST Connector | 1 | 1 | – | – |
| 100BaseFX Ports Single-Mode, SC Connector | – | – | 1 | 1 |
| Operating Temp. | -10 to 60°C | -40 to 75°C | -10 to 60°C | -40 to 75°C |
| — | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) | Add to Quote View Bag Buy from distributors (for USA only) |
Specifications
Shown for EDS-205A. Per-model differences are listed in the selection grid above.
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
- 5 Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection
- Standards
- IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control
- Optical Fiber
- Read more 100BaseFX Multi-Mode Fiber Cable Type OM1 OM2 OM3 OM4 Typical Distance 4 km 4 km 4 km 4 km Wavelength TX Range (nm) 1260 to 1360 RX Range (nm) 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 RX Range (dBm) -3 to -32 Link Budget (dB) 12 Dispersion Penalty (dB) 3 3 3 3 100BaseFX Multi-Mode Single-Mode Fiber Cable Type 50/125 µm G.652 800 MHz x km Typical Distance 5 km 40 km Wavelength TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When using a 40 km single-mode fiber transceiver over short distances, we highly recommend installing an attenuator to prevent damaging the transceiver due to excessive optical power. Note: To reach the "typical distance" of a fiber transceiver, the Link Budget (dB) should be greater than the combined Dispersion Penalty (dB) and Total Link Loss (dB).
Switch Properties
- MAC Table Size
- 2 K
- Packet Buffer Size
- 768 kbits
- Processing Type
- Store and Forward
Power Parameters
- Connection
- 1 removable 4-contact terminal block(s)
- Input Current
- 0.29 A (max.)
- Input Voltage
- 12/24/48 VDC Redundant dual inputs
- Operating Voltage
- 9.6 to 60 VDC
- Overload Current Protection
- Supported
- Reverse Polarity Protection
- Supported
DIP Switch Configuration
- Ethernet Interface
- Broadcast storm protection Quality of Service (QoS) Enabling the QoS DIP switch will also enable Multicast Filtering which will block LLDP & PROFINET PTCP-Delay traffic.
Physical Characteristics
- Housing
- Aluminum
- IP Rating
- IP30
- Dimensions
- 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in)
- Weight
- 175 g (0.39 lb)
- Installation
- DIN-rail mounting Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Safety
- UL 61010-1 UL 61010-2-201 UL 62368 EN 62368-1
- Hazardous Locations
- IECEx ATEX Class I Division 2
- Maritime
- ABS LR NK DNV
- Railway
- EN 50121-4
- Traffic Control
- NEMA TS2
- Shock
- IEC 60068-2-27
- Vibration
- IEC 60068-2-6
- Freefall
- IEC 60068-2-31
MTBF
- Time
- 3,969,664 hrs
- Standards
- Telcordia (Bellcore), GB
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
Resources
| Name | Type | Version | Date |
|---|---|---|---|
| Datasheet for EDS-205A Series647.3 KB | Datasheet | v3.0 | Dec 25, 2024 |
| QIG for EDS-205A/EDS-208A Series1.7 MB | QIG | v8.5 | Dec 25, 2024 |
| Declaration of Conformity (EU/UK) for EDS-205A Series311.7 KB | Declaration | v1.0 | Feb 02, 2024 |
| Tech Note: Recommended Procedure for STP Cable Grounding on Moxa's Industrial Ethernet Switches558.3 KB | Tech Note | v1.0 | Feb 12, 2019 |
| 2D CAD for EDS-205A-M-SC115.9 KB | 2D CAD | — | Jan 19, 2018 |
| 2D CAD for EDS-205A-S-SC331.0 KB | 2D CAD | — | Jan 19, 2018 |
| 2D CAD for EDS-205A-M-ST129.5 KB | 2D CAD | — | Jan 19, 2018 |
| 2D CAD for EDS-205A71.2 KB | 2D CAD | — | Jan 19, 2018 |
Need pricing on the EDS-205A Series?
Tell us quantities and we'll come back with a quote.