AWK-4252A-UN-T
AWK-4252A SeriesOutdoor industrial Wi-Fi 5 (802.11ac) wireless AP/bridge/clients
- IEEE 802.11ac Wi-Fi 5 AP/bridge/client
- Concurrent dual-band Wi-Fi with aggregated data rates up to 1.267 Gbps
- Adaptive self-forming, self-healing, and controller-agnostic mesh network with AeroMesh
- IP68-rated weatherproof housing designed for outdoor applications and -40 to 75°C wide operating temperature range
- Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections
- Power and antenna port isolation for enhanced ESD/surge protection and durability in extreme conditions
Certifications UL Listed · CE · FCC · WI FI
Ships from and sold by A5 IT, an authorized Moxa reseller.
Specifications
WLAN Interface
- WLAN Standards
- 2.4 GHz: 802.11b/g/n with 256 QAM support 5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support WMM for QoS
- Frequency Band for UN (20 MHz operating channels)
- 2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.745 to 5.825 GHz (5 channels) Available channels change depending on the selected country or region code.
- Wireless Security
- WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2/WPA3-Personal
- Wireless Roaming
- Turbo Roaming The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual. 802.11r
- Transmission Rate
- 2.4 GHz: Up to 400 Mbps 5 GHz: Up to 867 Mbps
- Transmitter Power for 802.11a (Dual Chain)
- 24±1.5 dBm @ 6 Mbps 22±1.5 dBm @ 54 Mbps
- Transmitter Power for 802.11n (5 GHz, Dual Chain)
- 24±1.5 dBm @ MCS0 20 MHz 21±1.5 dBm @ MCS7 20 MHz 23±1.5 dBm @ MCS0 40 MHz 21±1.5 dBm @ MCS7 40 MHz
- Transmitter Power for 802.11ac (Dual Chain)
- 23.5±1.5 dBm @ MCS0 20 MHz 20.5±1.5 dBm @ MCS8 20 MHz 23.5±1.5 dBm @ MCS0 40 MHz 20±1.5 dBm @ MCS9 40 MHz 22.5±1.5 dBm @ MCS0 80 MHz 20±1.5 dBm @ MCS9 80 MHz
- Transmitter Power for 802.11b (Dual Chain)
- 27.5±1.5 dBm @ 1 Mbps 28±1.5 dBm @ 11 Mbps
- Transmitter Power for 802.11g (Dual Chain)
- 28±1.5 dBm @ 6 Mbps 25±1.5 dBm @ 54 Mbps
- Transmitter Power for 802.11n (2.4 GHz, Dual Chain)
- 26±1.5 dBm @ MCS0 20 MHz 24±1.5 dBm @ MCS7 20 MHz 26±1.5 dBm @ MCS0 40 MHz 24.5±1.5 dBm @ MCS7 40 MHz
- Receiver Sensitivity for 802.11a (measured at 5.680 GHz)
- Typ. -88 @ 6 Mbps Typ. -71 @ 54 Mbps
- Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)
- Typ. -87 dBm @ MCS0 20 MHz Typ. -68 dBm @ MCS7 20 MHz Typ. -83 dBm @ MCS0 40 MHz Typ. -66 dBm @ MCS7 40 MHz
- Receiver Sensitivity for 802.11ac
- Typ. -87 dBm @ MCS0 20 MHz Typ. -64 dBm @ MCS8 20 MHz Typ. -84 dBm @ MCS0 40 MHz Typ. -59 dBm @ MCS9 40 MHz Typ. -81 dBm @ MCS0 80 MHz Typ. -56 dBm @ MCS9 80 MHz
- Receiver Sensitivity for 802.11b (measured at 2.437 GHz)
- Typ. -93 dBm @ 1 Mbps Typ. -86 dBm @ 11 Mbps Note: Concurrent USB read/write activity on the device may generate interference and may mildly affect receiver sensitivity performance. It is recommended to avoid USB activity on the device in mission-critical applications.
- Receiver Sensitivity for 802.11g (measured at 2.437 GHz)
- Typ. -88 dBm @ 6 Mbps Typ. -71 dBm @ 54 Mbps Note: Concurrent USB read/write activity on the device may generate interference and may mildly affect receiver sensitivity performance. It is recommended to avoid USB activity on the device in mission-critical applications.
- Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)
- Typ. -87 dBm @ MCS0 20 MHz Typ. -68 dBm @ MCS7 20 MHz Typ. -84 dBm @ MCS0 40 MHz Typ. -66 dBm @ MCS7 40 MHz Note: Concurrent USB read/write activity on the device may generate interference and may mildly affect receiver sensitivity performance. It is recommended to avoid USB activity on the device in mission-critical applications.
- WLAN Operation Mode
- Access point Client Client-Router Master Slave Sniffer Mesh
- Antenna
- External, 3/6 dBi Omni-directional
- Antenna Connectors
- 2 x N-type female
Ethernet Interface
- Standards
- IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3af for PoE IEEE 802.3at for PoE IEEE 802.3az for Energy-Efficient Ethernet IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication
- 10/100/1000BaseT(X) Ports (RJ45 connector)
- 1
- PoE Ports (10/100/1000BaseT(X), RJ45 connector)
- 1
Ethernet Software Features
- Management
- DHCP Server DHCP Client DNS HTTP IPv4/IPv6 LLDP SMTP SNMPv1/v2c/v3 Syslog TCP/IP Telnet UDP VLAN MXconfig MXview One MXview Wireless Turbo Roaming Analyzer
- Routing
- Port forwarding Static Route NAT
- Security
- HTTPS/SSL RADIUS SSH Certificate Management
- Time Management
- SNTP Client
Firewall
- Filter
- ICMP MAC address IP protocol Port-based Wi-Fi ACL Client Isolation
Serial Interface
- Console Port
- RS-232 8-pin RJ45
LED Interface
- LED Indicators
- PWR, LAN1, LAN2, 2.4G, 5G, SYS
Input/Output Interface
- Digital Inputs
- 2 Max. input current: 8 mA +13 to +30 V for state 1 +3 to -30 V for state 0
- Alarm Contact Channels
- Relay output with current carrying capacity of 1 A @ 24 VDC
- Buttons
- Reset button
Physical Characteristics
- Housing
- Metal
- Dimensions
- 66.5 x 157.6 x 244 mm (2.56 x 6.20 x 9.61 in)
- IP Rating
- IP68
- Weight
- 2024 g (4.7 lb)
- Installation
- Wall mounting DIN-rail mounting (with optional kit) Pole mounting (with optional kit)
Power Parameters
- Input Current
- 12 to 48 VDC, 2.2 to 0.55 A
- Input Voltage
- 12 to 48 VDC Redundant dual inputs 48 VDC Power over Ethernet
- Power Connector
- M12 A-coded 5-pin male connector
- Power Consumption
- 28.4 W (max.)
Environmental Limits
- Operating Temperature
- -40 to 75°C (-40 to 167°F)
- Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
- EMC
- EN 61000-6-2/-6-4 EN 55032/35
- EMI
- CISPR 32, FCC Part 15B Class A
- EMS
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V/m IEC 61000-4-8 PFMF: 30 A/m
- Cybersecurity
- IEC 62443-4-2 Security Level 1 EN 18031-1
- Safety
- IEC 62368-1 UL 62368-1
- Vibration
- IEC 60068-2-6
- Radio
- EN 300 328, EN 301 489-1/17, EN 301 893, FCC, MIC, NCC, RCM, SRRC, WPC, KC, NBTC, IC
MTBF
- Time
- 746,471 hrs
- Standards
- Telcordia Standard SR-332
Warranty
- Warranty Period
- 5 years
- Details
- See www.moxa.com/warranty
