Moxa
MGate 5111

MGate 5111

MGate 5111 Series

1-port Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateways

  • Converts Modbus, PROFINET, or EtherNet/IP to PROFIBUS
  • Supports PROFIBUS DP V0 slave
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports EtherNet/IP Adapter
  • Supports PROFINET IO device
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis
  • Status monitoring and fault protection for easy maintenance
  • microSD card for configuration backup/duplication and event logs
  • Supports redundant dual DC power inputs and 1 relay output
  • Serial port with 2 kV isolation protection
  • -40 to 75°C wide operating temperature models available

Certifications ATEX · Iecex · UL Listed · CE

Ships from and sold by A5 IT, an authorized Moxa reseller.

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)
2 Auto MDI/MDI-X connection
Magnetic Isolation Protection
1.5 kV (built-in)

Ethernet Software Features

Industrial Protocols
Modbus TCP Client (Master) Modbus TCP Server (Slave) PROFINET IO Device EtherNet/IP Adapter
Configuration Options
Web Console (HTTP/HTTPS) Device Search Utility (DSU) Telnet Console
Management
ARP DHCP Client DNS HTTP HTTPS SMTP SNMP Trap SNMPv1/v2c/v3 TCP/IP Telnet SSH UDP NTP Client
MIB
RFC1213, RFC1317
Time Management
NTP Client

Serial Interface

Console Port
RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
No. of Ports
1
Connector
DB9 male
Serial Standards
RS-232/422/485
Baudrate
50 bps to 921.6 kbps
Data Bits
7, 8
Parity
None Even Odd Space Mark
Stop Bits
1, 2
Flow Control
RTS Toggle (RS-232 only) RTS/CTS
RS-485 Data Direction Control
Automatic Data Direction Control (ADDC)
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485
120 ohms
Isolation
2 kV (built-in)

Serial Signals

RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features

Configuration Options
Serial Console
Industrial Protocols
PROFIBUS DP-V0 Slave Modbus RTU/ASCII Master Modbus RTU/ASCII Slave

Modbus RTU/ASCII

Mode
Master, Slave
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Commands
128
Input Data Size
2048 bytes
Output Data Size
2048 bytes

Modbus TCP

Mode
Client (Master), Server (Slave)
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Client Connections
16
Max. No. of Server Connections
32
Max. No. of Commands
128
Input Data Size
2048 bytes
Output Data Size
2048 bytes

PROFIBUS Interface

Industrial Protocols
PROFIBUS DP
No. of Ports
1
Connector
DB9 female
Baudrate
9600 bps to 12 Mbps
Isolation
2 kV (built-in)
Signals
PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V

PROFIBUS

Rotary Switch
PROFIBUS addresses 0-99 (addresses 100-125 supported through software configuration)
Mode
DP-V0 Slave
Max. No. of Master Connections
1
Max. No. of PROFIBUS I/O Modules
24
Input Data Size
244 bytes
Output Data Size
244 bytes

PROFINET

Mode
IO Device
Max. No. of IO Controller Connections
1 (for read/write)
Input Data Size
512
Output Data Size
512

EtherNet/IP

Mode
Adapter
CIP Objects Supported
Identity Message Router Assembly Connection Manager TCP/IP interface Ethernet link Port
Max. No. of Scanner Connections
1 (for read-only), 1 (for read/write)
Input Data Size
496 bytes
Output Data Size
496 bytes

Memory

microSD Slot
Up to 32 GB (SD 2.0 compatible)

Power Parameters

Input Voltage
12 to 48 VDC
Input Current
416 mA @ 12 VDC
Power Connector
Spring-type Euroblock terminal

Relays

Contact Current Rating
Resistive load: 2 A @ 30 VDC

Physical Characteristics

Housing
Metal
IP Rating
IP30
Dimensions
45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
Weight
589 g (1.30 lb)

Environmental Limits

Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)

Standards and Certifications

EMC
EN 61000-6-2/-6-4
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF
Safety
EN 62368-1 UL 61010-2-201
Hazardous Locations
ATEX Class I Division 2 IECEx
Freefall
IEC 60068-2-32
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6 IEC 60068-2-64

MTBF

Time
718,131 hrs
Standards
Telcordia SR332

Warranty

Warranty Period
5 years
Details
See www.moxa.com/warranty

Documentation

NameTypeVersionDate
Software Package for MXview One Series (Linux version)552.6 MBSoftware Packagev1.7.2May 08, 2026 May 08, 2026 Release notes
Software Package for MXview One Series (Windows version)249.1 MBSoftware Packagev1.7.2May 08, 2026 May 08, 2026 Release notes
Firmware for MGate 5111 Series8.6 MBFirmwarev2.2Mar 23, 2026 Mar 23, 2026 Release notes
Moxa CLI Configuration Tool (Linux)11.3 MBUtilityv1.6Feb 02, 2026 Feb 02, 2026 Release notes
Moxa CLI Configuration Tool (Windows)2.1 MBUtilityv1.6Feb 02, 2026 Feb 02, 2026 Release notes
Device Search Utility (portable)128.6 MBUtilityv3.1Nov 17, 2025 Nov 17, 2025 Release notes
Device Search Utility (installer)236.2 MBUtilityv3.1Nov 17, 2025 Nov 17, 2025 Release notes
MXconfig Plugin1.8 MBSoftware Packagev1.8Oct 02, 2025 Oct 02, 2025 Release notes
MXview One plugin (Linux)21.7 MBSoftware Packagev1.8Oct 01, 2025 Oct 01, 2025 Release notes
MXview One plugin (Windows)22.6 MBSoftware Packagev1.8Oct 01, 2025 Oct 01, 2025 Release notes
Moxa CLI Configuration Tool (Windows)2.0 MBUtilityv1.5Jul 30, 2025 Jul 30, 2025 Release notes
MXconfig Plugin3.6 MBSoftware Packagev1.7Nov 11, 2024 Nov 11, 2024 Release notes
MXconfig plugin (non-Java version)1.8 MBSoftware Packagev1.6Nov 11, 2024 Nov 11, 2024 Release notes
MXview Plugin41.7 MBSoftware Packagev1.6Oct 04, 2024 Oct 04, 2024 Release notes
MXview Plugin40.8 MBSoftware Packagev1.5Jun 12, 2024 Jun 12, 2024 Release notes
Device Search Utility2.2 MBUtilityv2.7Jun 28, 2023 Jun 28, 2023 Release notes
EtherNet/IP Adapter EDS file for MGate 5111 Series11.5 KBSoftware Packagev2.1Sep 02, 2019 Sep 02, 2019 Release notes
PROFIBUS GSD file for MGate 5111 Series4.8 KBSoftware Packagev1.0Jan 19, 2018 Jan 19, 2018 Release notes
MIB file for MGate 5111 Series15.2 KBSoftware Packagev1.0Jan 18, 2018 Jan 18, 2018 Release notes
Software Package for MGate 5111 Series (GSDML file)25.4 KBSoftware Packagev1.0Jan 18, 2018 Jan 18, 2018 Release notes
Manual for MGate 5111 Series6.4 MBManualv1.3Apr 21, 2026
Tech Note: The Security Hardening Guide for MGate 5000 Series1.4 MBTech Notev2.5Mar 23, 2026
FOSS Statement for MGate 5000 Series476.7 KBDeclarationv1.2Mar 23, 2026
Moxa CLI Configuration Tool User Manual850.9 KBManualv2.5Feb 12, 2026
Device Search Utility v3.x User Manual2.8 MBManualv1.1Nov 17, 2025
Datasheet for MGate 5111 Series715.7 KBDatasheetv1.3Aug 06, 2025
Declaration of Conformity for MGate 5111/5118 Series306.7 KBDeclarationv1.0Jun 27, 2025
FOSS Statement for Moxa CLI Configuration Tool114.6 KBDeclarationv1.0Dec 10, 2024
FOSS Statement for Device Search Utility161.8 KBDeclarationv1.0Jun 24, 2024
Tech Note: Configuring and Monitoring with MXview One/MXview and MXconfig (non-java and java) Plugins2.1 MBTech Notev1.0May 07, 2024
QIG for MGate 5111 Series693.8 KBQIGv1.3May 18, 2023
Tech Note: How to Use the TIA Portal to Set a Siemens PLC and the MGate 51111.9 MBTech Notev1.0Dec 28, 2017
2D CAD for Mgate 5111133.0 KB2D CADDec 22, 2017

Other models in the MGate 5111 Series